PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10792-3
10792-3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The SHAFT ASSEMBLY,FLEXIBLE is a the manufacturer industrial component. Key specifications include material: GLASS PROTECTIVE CRYSTAL, dial_size: 2-1/2 IN. DIA IN, bezel_type: SNAP-ON, scale_name: VACUUM, scale_type: SINGLE, scale_range: +0.000 TO 30.000 INCHES OF MERCURY IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6183, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10792-3
NSN: 3110-00-100-6183
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialGLASS PROTECTIVE CRYSTAL
dial_size2-1/2 IN. DIA IN
bezel_typeSNAP-ON
scale_nameVACUUM
scale_typeSINGLE
scale_range+0.000 TO 30.000 INCHES OF MERCURY IN
pointer_typeINDICATING
adjustabilityNONADJUSTABLE
overall_depth1.230 INCHES NOMINAL IN
pointer_colorBLACK
actuation_typeSINGLE BOURDON TUBE
scale_accuracy2 PCT MIDDLE HALF OF SCALE 3 PCT REMAINDER OF SCALE
NSN3110-00-100-6183
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10792-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR BALLS, GRADE 50
•
ROLLING ELEMENT DIAMETER: 0.4062 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: BALL
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR BALLS, GRADE 50
ROLLING ELEMENT DIAMETER0.4062 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORBALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
60E7-1Interchangeable
interchangeable cross-reference
interchangeable
P11Interchangeable
interchangeable cross-reference
interchangeable
1445Interchangeable
interchangeable cross-reference
interchangeable
796181AInterchangeable
interchangeable cross-reference
interchangeable
61153Interchangeable
interchangeable cross-reference
interchangeable
B107.52Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10792-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10792-3?
10792-3 is a SHAFT ASSEMBLY,FLEXIBLE.
What parts can replace 10792-3?
There are 22 known substitutes for 10792-3: 60E7-1, P11, 1445 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10792-3?
10792-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6183. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10792-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026