PartsTable
Technical Data Sheet
Download PDF

107828 — CAPACITOR,FIXED,ELECTROLYTIC

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

107828: CAPACITOR,FIXED,ELECTROLYTIC.

- For quick, effective and gentle cleaning of displays - Very high-quality, extremely absorbent and washable microfibre towel for lint-free cleaning - Very high-quality, extremely absorbent and washable microfibre towel for lint-free cleaning - Made of extremely thin high-tech fibre with top cleaning efficiency - Can be used hundreds of times - 100% lint-free - Suitable for all displays This part is cataloged in the U.S. Government catalog under NSN 5310-00-010-7823, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 107828
NSN: 5310-00-010-7823
NIINs: 000107823, 010357997, 013466341, 015158273
FSC: 5310 — Nuts and Washers
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OVERALL
nut_styleSTAMPED
anode_typePLAIN FOIL
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
nut_height0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
body_length0.704 INCHES NOMINAL IN
body_diameter0.312 INCHES NOMINAL IN
terminal_length2.393 INCHES NOMINAL IN
features_providedHERMETICALLY SEALED CASE
surface_treatmentCADMIUM OVERALL
terminal_diameter0.025 INCHES NOMINAL IN
width_across_flats0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
NSN5310-00-010-7823
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 107828 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
GRIPPING NOTCH QUANTITY: 9
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.375 INCHES NOMINAL IN
•
NUT HEIGHT: 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: STAMPED
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
GRIPPING NOTCH QUANTITY9
MATING MEMBER DIAMETER ACCOMMODATED0.375 INCHES NOMINAL IN
NUT HEIGHT0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLESTAMPED
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
356011S7Reference document
Same NSN cross-reference
Reference document — Secondary reference
356011S2Reference document
Same NSN cross-reference
Reference document — Secondary reference
11822P5Reference document
Same NSN cross-reference
Reference document — Secondary reference
107823Reference document
Same NSN cross-reference
Reference document — Secondary reference
38R24Reference document
Same NSN cross-reference
Reference document — Secondary reference
BBSX6Q1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 107828?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 107828?
107828 is a CAPACITOR,FIXED,ELECTROLYTIC manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 107828?
There are 9 known substitutes for 107828: 356011S7, 356011S2, 11822P5 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 107828?
107828 is cataloged in the U.S. Government catalog under NSN 5310-00-010-7823. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 107828

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.