PartsTable
Technical Data Sheet
Download PDF

10781-002 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10781-002: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_length: 0.085 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN, screw_material: STEEL COMP 303, fastener_length: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-018-7234, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10781-002
NSN: 5305-01-018-7234
FSC: 5305 — Screws
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_length0.085 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303
fastener_length0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch56
NSN5305-01-018-7234
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10781-002 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.085 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 303
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.085 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 303
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
2-56 UNC-2AX3/1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10781-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10781-002?
10781-002 is a SCREW,MACHINE.
What parts can replace 10781-002?
There is 1 known substitute for 10781-002: 2-56 UNC-2AX3/1. Substitute compatibility should be verified for your specific system.
What is the NSN for 10781-002?
10781-002 is cataloged in the U.S. Government catalog under NSN 5305-01-018-7234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10781-002