PartsTable
Technical Data Sheet
Download PDF

107695-10 — WASHER,SADDLE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

107695-10: WASHER,SADDLE.

The WASHER,SADDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.125 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN, overall_width: 0.564 INCHES MINIMUM AND 0.596 INCHES MAXIMUM IN, overall_length: 0.500 INCHES MINIMUM AND 0.532 INCHES MAXIMUM IN, special_features: ONE EDGE OF WASHER IS ROUNDED WITH 13/32 IN. RADIUS IN, style_designator: SADDLE.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-063-9015, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
107695-10
NSN: 5310-00-063-9015
FSC: 5310 — Nuts and Washers
CAGE: 37695 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.125 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
overall_width0.564 INCHES MINIMUM AND 0.596 INCHES MAXIMUM IN
overall_length0.500 INCHES MINIMUM AND 0.532 INCHES MAXIMUM IN
special_featuresONE EDGE OF WASHER IS ROUNDED WITH 13/32 IN. RADIUS IN
style_designatorSADDLE
surface_treatmentCADMIUM OVERALL
material_thickness0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
thickness_at_bolt_hole0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
NSN5310-00-063-9015
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 107695-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SADDLE
•
MATERIAL THICKNESS: 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
THICKNESS AT BOLT HOLE: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSADDLE
OVERALL LENGTH0.500 INCHES MINIMUM AND 0.532 INCHES MAXIMUM IN
OVERALL WIDTH0.564 INCHES MINIMUM AND 0.596 INCHES MAXIMUM IN
MATERIAL THICKNESS0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
THICKNESS AT BOLT HOLE0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
SPECIAL FEATURESONE EDGE OF WASHER IS ROUNDED WITH 13/32 IN. RADIUS IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.125 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
2192512411-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D6SE-167GYSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
400-137-102Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
860475-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
128402Reference document
Same NSN cross-reference
Reference document — Secondary reference
QB400493-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 107695-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 107695-10?
107695-10 is a WASHER,SADDLE.
What parts can replace 107695-10?
There are 7 known substitutes for 107695-10: 2192512411-1, D6SE-167GY, 400-137-102 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 107695-10?
107695-10 is cataloged in the U.S. Government catalog under NSN 5310-00-063-9015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 107695-10