The Tool,shaft Alignment, cataloged under National Stock Number 1075-01-024-2033, is classified within Federal Supply Class 1075 (Degaussing and Mine Sweeping Equipment) of the Weapons group. The manufacturer of record is Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier. Government technical data includes 1 specification, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 1075-01-024-2033 |
| Primary Part Number | 610AS111 |
| Item Name | Tool,shaft Alignment |
| FSC / FSG | 1075 / 10 — Degaussing and Mine Sweeping Equipment |
| Manufacturer | Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier |
| Status | ACTIVE |
| General Characteristics Item Description | C/O A SHAFT MADE FROM CRES AISI TYPE 303 HAVING A LG OF 5.05 IN. MAX,A DIA OF 1.062 IN. MAX,A SPUR GEAR CUT ON 1 END WITH 19 TEETH PITCH DIA 0.5938 IN. PRESSURE ANGLE 30 DEG 1.200 IN.LONG,THE OTHER END HAVING 2 FLATS CUTACROSS THE SHAFT 180 DEG FROM EACH OTHER TO A LG 1.00 IN. MAX 0.0935 IN. DEEP IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 610AS111 PRIMARY | Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier (USA) |
NSN 1075-01-024-2033 is a Tool,shaft Alignment, manufactured by Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier, classified under FSC 1075, Degaussing and Mine Sweeping Equipment. Status: active.
NSN 1075-01-024-2033 has 1 manufacturer part number on file: 610AS111 (Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier).
Key specifications for 610AS111: General Characteristics Item Description: C/O A SHAFT MADE FROM CRES AISI TYPE 303 HAVING A LG OF 5.05 IN. MAX,A DIA OF 1.062 IN. MAX,A SPUR GEAR CUT ON 1 END WITH 19 TEETH PITCH DIA 0.5938 IN. PRESSURE ANGLE 30 DEG 1.200 IN.LONG,THE OTHER END HAVING 2 FLATS CUTACROSS THE SHAFT 180 DEG FROM EACH OTHER TO A LG 1.00 IN. MAX 0.0935 IN. DEEP IN. 1 specification is documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.