PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10722-1
10722-1 ✓ Verified by PartsTable
Hama · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Connection cable for original Pioneer radios to ISO sockets (replacement for the standard Alpine cable)<br>- Speaker and power supply<br>- 18 pins to ISO<br>- Size of the plug: approx. 27 x 11 mm<br><br>For the following Pioneer radios:<br>- DEH P80MP / P6600R / P8100R / P8400MP / P9100R / P9300R / P9600MP<br>- KEH P6900R / P7900R / P8900RW<br>- EH-P9400MP This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3601, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
10722-1
NSN: 3110-00-100-3601
FSC: 3110
CAGE: 58275 — SASCO INC CANADIAN DIV
SPECIFICATIONS
width0.780 INCHES NOMINAL IN
length1.145 INCHES NOMINAL IN
materialGLASS INSULATION
thickness0.250 INCHES NOMINAL IN
cone_width0.9330 INCHES NOMINAL IN
bevel_depth0.188 INCHES NOMINAL IN
bore_diameter1.5000 INCHES NOMINAL IN
overall_height0.279 INCHES0.279 INCHES IN
largest_diameter0.060 INCHES ALL ENDS IN
overall_diameter0.134 INCHES0.134 INCHES IN
style_designatorSTEEP ANGLE
unable_to_decodeUNABLE TO DECODE
NSN3110-00-100-3601
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10722-1 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
CONE WIDTH: 0.9330 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STEEP ANGLE
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.5000 INCHES NOMINAL IN
CONE WIDTH0.9330 INCHES NOMINAL IN
STYLE DESIGNATORSTEEP ANGLE
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.0938 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
107221Interchangeable
interchangeable cross-reference
interchangeable
208Interchangeable
interchangeable cross-reference
interchangeable
2001 80Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
TYPE I DESIGN 4 STYLE CInterchangeable
interchangeable cross-reference
interchangeable
WC586Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10722-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10722-1?
10722-1 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Hama.
What parts can replace 10722-1?
There are 27 known substitutes for 10722-1: 107221, 208, 2001 80 and 24 more. Substitute compatibility should be verified for your specific system.
Is 10722-1 still available?
10722-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10722-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026