PartsTable
Technical Data Sheet
Download PDF

107180 — RESISTANCE ELEMENT

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

107180: RESISTANCE ELEMENT.

- Slim protective cover made of plastic - Provides access to all functions - The iPhone 4 remains fully operational - Model: Cover. Key specifications include material: PLASTIC, unit_type: WIRE, hole_diameter: 0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN, terminal_type: SOLDER STUD, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, terminal_length: 0.100 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-1041, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 107180
NSN: 5310-00-011-1041
NIINs: 000111041, 004110623
FSC: 5310 — Nuts and Washers
CAGE: 28528 — ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST (USA)
SPECIFICATIONS
materialPLASTIC
unit_typeWIRE
tap_quantity1
hole_diameter0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
terminal_typeSOLDER STUD
hardness_rating35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
terminal_length0.100 INCHES IN
outside_diameter0.250 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
terminal_quantity3
material_thickness0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
NSN5310-00-011-1041
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 107180 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI 302 OR SAE 30302 FED STD 1ST MATERIAL RESPONSE AND FED STD 66,AISI 420 OR SAE 51420 FED STD 2ND MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.250 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 2 STYLE AND C CLASS
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI 302 OR SAE 30302 FED STD 1ST MATERIAL RESPONSE AND FED STD 66,AISI 420 OR SAE 51420 FED STD 2ND MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.250 INCHES MAXIMUM IN
MATERIAL THICKNESS0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 STYLE AND C CLASS
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 302 AND STEEL COMP 420 OVERALL
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
921060000Reference document
Same NSN cross-reference
Reference document — Secondary reference
8599478-006Reference document
Same NSN cross-reference
Reference document — Secondary reference
R103A62Reference document
Same NSN cross-reference
Reference document — Secondary reference
0164-07Reference document
Same NSN cross-reference
Reference document — Secondary reference
SMC319758-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
SCC91377-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 107180?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 107180?
107180 is a RESISTANCE ELEMENT manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 107180?
There are 7 known substitutes for 107180: 921060000, 8599478-006, R103A62 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 107180?
107180 is cataloged in the U.S. Government catalog under NSN 5310-00-011-1041. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 107180