PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10708-9
10708-9 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,CAP,DUAL WHEEL MOUNTING is a the manufacturer industrial component. Key specifications include height: 1.932 INCHES NOMINAL IN, diameter: 2.0 INCHES NOMINAL IN, pointer_type: CLOCK-HAND ALL POINTERS, presentation_type: DIAL, part_name_assigned_by_controlling_agency: TACHOMETER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-085-0605, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10708-9
NSN: 5310-00-085-0605
FSC: 5310
CAGE: 28528 — ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST (USA)
SPECIFICATIONS
height1.932 INCHES NOMINAL IN
diameter2.0 INCHES NOMINAL IN
pointer_typeCLOCK-HAND ALL POINTERS
pointer_quantity2
presentation_typeDIAL
part_name_assigned_by_controlling_agencyTACHOMETER
NSN5310-00-085-0605
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10708-9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.175 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B159 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.023 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 510 OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.175 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B159 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
HOLE DIAMETER0.093 INCHES NOMINAL IN
MATERIAL THICKNESS0.023 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 510 OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
10RS232Interchangeable
interchangeable cross-reference
interchangeable
10708RInterchangeable
interchangeable cross-reference
interchangeable
2530003591162Interchangeable
interchangeable cross-reference
interchangeable
107089Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10708-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10708-9?
10708-9 is a NUT,CAP,DUAL WHEEL MOUNTING.
What parts can replace 10708-9?
There are 4 known substitutes for 10708-9: 10RS232, 10708R, 2530003591162 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10708-9?
10708-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-085-0605. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10708-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026