PartsTable
Technical Data Sheet
PartsTable / O-RING / 106A2989P2
106A2989P2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 1.699 INCHES NOMINAL IN, center_hole_diameter: 1.409 INCHES MINIMUM AND 1.433 INCHES MAXIMUM IN, cross-sectional_height: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-892-1917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
106A2989P2
NSN: 5331-00-892-1917
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter1.699 INCHES NOMINAL IN
center_hole_diameter1.409 INCHES MINIMUM AND 1.433 INCHES MAXIMUM IN
cross-sectional_height0.125 INCHES NOMINAL IN
NSN5331-00-892-1917
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 106A2989P2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 1.409 INCHES MINIMUM AND 1.433 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.699 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER1.409 INCHES MINIMUM AND 1.433 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.699 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
6374D13-1PC56Interchangeable
interchangeable cross-reference
interchangeable
MIL-G-21610 TYPE IInterchangeable
interchangeable cross-reference
interchangeable
AS568-260Interchangeable
interchangeable cross-reference
interchangeable
2-221P648-9Interchangeable
interchangeable cross-reference
interchangeable
30807268P14Interchangeable
interchangeable cross-reference
interchangeable
2-221P648-90Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 106A2989P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106A2989P2?
106A2989P2 is a O-RING.
What parts can replace 106A2989P2?
There are 16 known substitutes for 106A2989P2: 6374D13-1PC56, MIL-G-21610 TYPE I, AS568-260 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 106A2989P2?
106A2989P2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-892-1917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106A2989P2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026