PartsTable
Technical Data Sheet
Download PDF

1069-411 — GASKET

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

1069-411: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 1.450 INCHES NOMINAL IN, screw_material: STEEL.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-035-1728, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1069-411
NSN: 5305-01-035-1728
NIINs: 010351728, 011784999
FSC: 5305 — Screws
CAGE: 31361 — WOODWARD, INC. (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length1.450 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length1.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE OR ZINC
thread_quantity_per_inch40
NSN5305-01-035-1728
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1069-411 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.450 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC
FASTENER LENGTH1.500 INCHES NOMINAL IN
THREAD LENGTH1.450 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
219258Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1069-411?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1069-411?
1069-411 is a GASKET.
What parts can replace 1069-411?
There is 1 known substitute for 1069-411: 219258. Substitute compatibility should be verified for your specific system.
What is the NSN for 1069-411?
1069-411 is cataloged in the U.S. Government catalog under NSN 5305-01-035-1728. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1069-411

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.