PartsTable
Technical Data Sheet
Download PDF

106888-1 — 106888-1

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

106888-1: 106888-1.

The 106888-1 is a the manufacturer industrial component. Key specifications include end_item_identification: GLOBAL BROADCAST SYSTEM, part_name_assigned_by_controlling_agency: SATELLITE TRACKING RECEIVER/CONTROLLER (STRC). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-999-2128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 106888-1
NSN: 5340-00-999-2128
NIINs: 009992128, 015301058
FSC: 5340 — Hardware, Commercial
CAGE: 80212 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)
SPECIFICATIONS
end_item_identificationGLOBAL BROADCAST SYSTEM
part_name_assigned_by_controlling_agencySATELLITE TRACKING RECEIVER/CONTROLLER (STRC)
NSN5340-00-999-2128
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 106888-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.187 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.875 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
LOOP INSIDE DIAMETER: 0.843 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.187 INCHES NOMINAL IN
SPECIAL FEATURES2350-01-103-5641
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.875 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY OVERALL
LOOP INSIDE DIAMETER0.843 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
10861531Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2590009992128Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 106888-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106888-1?
106888-1 is a 106888-1. It is classified as a MRO (MRO_GENERAL).
What parts can replace 106888-1?
There are 2 known substitutes for 106888-1: 10861531, 2590009992128. Substitute compatibility should be verified for your specific system.
What is the NSN for 106888-1?
106888-1 is cataloged in the U.S. Government catalog under NSN 5340-00-999-2128. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106888-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.