PartsTable
Technical Data Sheet
Download PDF

106830-5D34 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

106830-5D34: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-040-9453, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
106830-5D34
NSN: 5305-00-040-9453
FSC: 5305 — Screws
CAGE: 50392 — SPS TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
grip_length2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_length0.441 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
fastener_length2.576 INCHES MINIMUM AND 2.623 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleHIGH-TORQUE
nominal_thread_diameter0.312 INCHES IN
NSN5305-00-040-9453
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 106830-5D34 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 2.576 INCHES MINIMUM AND 2.623 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.441 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 08524-B-19019 MANUFACTURERS STANDARD
•
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH2.576 INCHES MINIMUM AND 2.623 INCHES MAXIMUM IN
THREAD LENGTH0.441 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA08524-B-19019 MANUFACTURERS STANDARD
GRIP LENGTH2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 7
ST3M454-5D34Reference document
Same NSN cross-reference
Reference document — Secondary reference
HT295-5D34Reference document
Same NSN cross-reference
Reference document — Secondary reference
HT4025L5D34Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BM19019-5D34Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST3M454-5DL34Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
HT8140-5D34Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 106830-5D34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106830-5D34?
106830-5D34 is a SCREW,CLOSE TOLERANCE.
What parts can replace 106830-5D34?
There are 7 known substitutes for 106830-5D34: ST3M454-5D34, HT295-5D34, HT4025L5D34 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 106830-5D34?
106830-5D34 is cataloged in the U.S. Government catalog under NSN 5305-00-040-9453. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106830-5D34

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.