The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 1.126 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING AND RUBBER SYNTHETIC OVERALL, overall_length: 1.630 INCHES MINIMUM AND 1.690 INCHES MAXIMUM IN, special_features: MATERIAL:CLAMP: CRES, CLASS 305, CONDITION A, SPEC QQ-S-768; LINER: NEOPRENE RUBBER PER AMS 3209, lug_hole_diameter: 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-279-0922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
10675113
NSN:5340-01-279-0922 FSC:5340 — Hardware, Commercial CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter
1.126 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN
material
STEEL CORROSION RESISTING AND RUBBER SYNTHETIC OVERALL
overall_length
1.630 INCHES MINIMUM AND 1.690 INCHES MAXIMUM IN
special_features
MATERIAL:CLAMP: CRES, CLASS 305, CONDITION A, SPEC QQ-S-768; LINER: NEOPRENE RUBBER PER AMS 3209
lug_hole_diameter
0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
surface_treatment
PASSIVATE OVERALL
supplementary_features
FINISH: CLAMP: PASSIVATE PER FINISH 5.4.1 OF MIL-STD-171
part_name_assigned_by_controlling_agency
CLAMP, LOOP
NSN
5340-01-279-0922
COMPONENT DIAGRAM
KEY FEATURES
•
LUG HOLE DIAMETER: 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
•
SUPPLEMENTARY FEATURES: FINISH: CLAMP: PASSIVATE PER FINISH 5.4.1 OF MIL-STD-171
•
DIAMETER: 1.126 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
TEST DATA DOCUMENT: 18876-10675113 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER
0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
SUPPLEMENTARY FEATURES
FINISH: CLAMP: PASSIVATE PER FINISH 5.4.1 OF MIL-STD-171
DIAMETER
1.126 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN
OVERALL LENGTH
1.630 INCHES MINIMUM AND 1.690 INCHES MAXIMUM IN
SPECIAL FEATURES
MATERIAL:CLAMP: CRES, CLASS 305, CONDITION A, SPEC QQ-S-768; LINER: NEOPRENE RUBBER PER AMS 3209
SURFACE TREATMENT
PASSIVATE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY
CLAMP, LOOP
TEST DATA DOCUMENT
18876-10675113 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
MATERIAL
STEEL CORROSION RESISTING AND RUBBER SYNTHETIC OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10675113?
10675113 is a CLAMP,LOOP.
What parts can replace 10675113?
There is 1 known substitute for 10675113: 7C27-5BA. Substitute compatibility should be verified for your specific system.
What is the NSN for 10675113?
10675113 is cataloged in the U.S. Government catalog under NSN 5340-01-279-0922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.