PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10674708-2
10674708-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, shank_length: 0.540 INCHES NOMINAL IN, overall_length: 0.880 INCHES NOMINAL IN, shank_diameter: 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, first_end_style: CHAMFERED, second_end_style: SQUARE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-689-3915, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10674708-2
NSN: 5315-00-689-3915
FSC: 5315
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
shank_length0.540 INCHES NOMINAL IN
overall_length0.880 INCHES NOMINAL IN
shank_diameter0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
first_end_styleCHAMFERED
second_end_styleSQUARE
special_features0.127 IN. MIN,0.133 IN. MAX DIA HOLE,0.310 IN.DEEP IN SHOULDER END,TWO TAPPED HOLES THRU SHOULDER WALL 0.086-56 UNC 2B THD 120 DEG APART IN
style_designatorSHOULDER
shoulder_diameter0.250 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
first_end_locationSHANK END
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-00-689-3915
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10674708-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER DIAMETER: 0.250 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH0.880 INCHES NOMINAL IN
SHOULDER DIAMETER0.250 INCHES NOMINAL IN
SPECIAL FEATURES0.127 IN. MIN,0.133 IN. MAX DIA HOLE,0.310 IN.DEEP IN SHOULDER END,TWO TAPPED HOLES THRU SHOULDER WALL 0.086-56 UNC 2B THD 120 DEG APART IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
STYLE DESIGNATORSHOULDER
MATERIALSTEEL COMP 303 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
55202Interchangeable
interchangeable cross-reference
interchangeable
A55202Interchangeable
interchangeable cross-reference
interchangeable
EHH9356Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10674708-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10674708-2?
10674708-2 is a PIN,SHOULDER,HEADLESS.
What parts can replace 10674708-2?
There are 3 known substitutes for 10674708-2: 55202, A55202, EHH9356. Substitute compatibility should be verified for your specific system.
What is the NSN for 10674708-2?
10674708-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-689-3915. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10674708-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026