PartsTable
Technical Data Sheet
Download PDF

10670723 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10670723: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, housing_bore_diameter: 3.623 INCHES NOMINAL IN, sealing_element_style: ANGULAR, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-171-9875, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10670723
NSN: 5330-00-171-9875
FSC: 5330 — Packing and Gasket Materials
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
housing_bore_diameter3.623 INCHES NOMINAL IN
sealing_element_styleANGULAR
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter2.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-171-9875
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10670723 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
HOUSING BORE DIAMETER3.623 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.625 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 9
4284Reference document
Same NSN cross-reference
Reference document — Secondary reference
362220Reference document
Same NSN cross-reference
Reference document — Secondary reference
ADS1610Reference document
Same NSN cross-reference
Reference document — Secondary reference
G0H886Reference document
Same NSN cross-reference
Reference document — Secondary reference
55003Reference document
Same NSN cross-reference
Reference document — Secondary reference
XGD60G3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 10670723?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10670723?
10670723 is a SEAL,PLAIN ENCASED.
What parts can replace 10670723?
There are 9 known substitutes for 10670723: 4284, 362220, ADS1610 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10670723?
10670723 is cataloged in the U.S. Government catalog under NSN 5330-00-171-9875. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10670723

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.