PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 106706T-4-4
106706T-4-4 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-206-7259, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
106706T-4-4
NSN: 5305-01-206-7259
FSC: 5305
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.386 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES THREADS
fastener_length0.646 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5305-01-206-7259
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 106706T-4-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.386 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
THREAD CLASS: 3A A
•
MATERIAL: STEEL COMP H11 OVERALL
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6847 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.386 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
GRIP LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
THREAD CLASS3A A
MATERIALSTEEL COMP H11 OVERALL
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6847 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE FINISH32.0 MICROINCHES GRIP
FASTENER LENGTH0.646 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
HEAD DIAMETER0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
120-244Interchangeable
interchangeable cross-reference
interchangeable
20-244Interchangeable
interchangeable cross-reference
interchangeable
HR204-4-4Interchangeable
Same NIIN cross-reference
interchangeable
GB510CE4-4Interchangeable
Same NIIN cross-reference
interchangeable
PBF1202-4-4Interchangeable
Same NIIN cross-reference
interchangeable
GB510FG4-4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 106706T-4-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106706T-4-4?
106706T-4-4 is a SCREW,CLOSE TOLERANCE.
What parts can replace 106706T-4-4?
There are 7 known substitutes for 106706T-4-4: 120-244, 20-244, HR204-4-4 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 106706T-4-4?
106706T-4-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-206-7259. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106706T-4-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026