Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The COVER,ACCESS is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, width: 0.285 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN, material: PLASTIC POLYCARBONATE, special_features: 0PPN6 IS AN AUTHORIZED DISTRIBUTOR FOR CAGE CODE 08179 (APPROVED SOURCE OF SUPPLY LISTED ON DRAWING), end_item_identification: B52H/ALALR20A, part_name_assigned_by_controlling_agency: GUARD. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-668-2617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
0PPN6 IS AN AUTHORIZED DISTRIBUTOR FOR CAGE CODE 08179 (APPROVED SOURCE OF SUPPLY LISTED ON DRAWING)
special_test_features
ITEM IS PROTECTIVE COVER FOR FRONT OF SWITCH TO PREVENT INADVERTENT ACTUATION; LEGEND ON SWITCH: BNS /MAN, MAXIMUM WEIGHT: 25OZ OZ
end_item_identification
B52H/ALALR20A
part_name_assigned_by_controlling_agency
GUARD
NSN
5340-01-668-2617
COMPONENT DIAGRAM
KEY FEATURES
•
USAGE DESIGN: THE -5 GUARD SHALL CONSIST OF A HINGED,TRANSPARENT COVER AND APPROPRIATE ATTACHING RING TO COVER THE LENS-LAMP HOUSING AND PREVENT INADVERTENT ACTUATION; IT SHALL BE SPRING LOADED TO STAY IN EITHER THE DOWN (SWITCH GUARDED) OR UP (OPEN) POSITION; THE GUARD SHALL BE SO DESIGNED AS TO BE OPERABLE WITH A GLOVED HAND; THE ATTACHING RING SHALL BE DESIGNED TO FIT BETWEEN THE PANEL SPACER AND THE SWITCH BEZEL AND SHALL BE HELD FIRMLY IN PLACE WHEN THE SWITCH IS MOUNTED TO A PANEL; THE TRANSPARENT COVER SHALL BE OF POLYCARBONATE, FLAME RESISTANT
•
WIDTH: 0.285 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
•
SPECIAL TEST FEATURES: ITEM IS PROTECTIVE COVER FOR FRONT OF SWITCH TO PREVENT INADVERTENT ACTUATION; LEGEND ON SWITCH: BNS /MAN, MAXIMUM WEIGHT: 25OZ OZ
•
MATERIAL: PLASTIC POLYCARBONATE
•
SHAPE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION
B52H/ALALR20A
USAGE DESIGN
THE -5 GUARD SHALL CONSIST OF A HINGED,TRANSPARENT COVER AND APPROPRIATE ATTACHING RING TO COVER THE LENS-LAMP HOUSING AND PREVENT INADVERTENT ACTUATION; IT SHALL BE SPRING LOADED TO STAY IN EITHER THE DOWN (SWITCH GUARDED) OR UP (OPEN) POSITION; THE GUARD SHALL BE SO DESIGNED AS TO BE OPERABLE WITH A GLOVED HAND; THE ATTACHING RING SHALL BE DESIGNED TO FIT BETWEEN THE PANEL SPACER AND THE SWITCH BEZEL AND SHALL BE HELD FIRMLY IN PLACE WHEN THE SWITCH IS MOUNTED TO A PANEL; THE TRANSPARENT COVER SHALL BE OF POLYCARBONATE, FLAME RESISTANT
WIDTH
0.285 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
SPECIAL TEST FEATURES
ITEM IS PROTECTIVE COVER FOR FRONT OF SWITCH TO PREVENT INADVERTENT ACTUATION; LEGEND ON SWITCH: BNS /MAN, MAXIMUM WEIGHT: 25OZ OZ
SPECIAL FEATURES
0PPN6 IS AN AUTHORIZED DISTRIBUTOR FOR CAGE CODE 08179 (APPROVED SOURCE OF SUPPLY LISTED ON DRAWING)
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10648BG2-5?
10648BG2-5 is a COVER,ACCESS.
What parts can replace 10648BG2-5?
There are 7 known substitutes for 10648BG2-5: 50543, 51056-0, 37-1059-5 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10648BG2-5?
10648BG2-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-668-2617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.