PartsTable
Technical Data Sheet
Download PDF

106467-12-47 — BOLT,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

106467-12-47: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 6150 OVERALL, head_style: HEXAGON COUNTERSUNK UNDERCUT, grip_length: 2.938 INCHES MINIMUM AND 2.954 INCHES MAXIMUM IN, head_height: 0.376 INCHES MINIMUM IN, thread_class: 3A A, fastener_length: 3.960 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-508-0906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
106467-12-47
NSN: 5306-01-508-0906
FSC: 5306 — Bolts
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 6150 OVERALL
head_styleHEXAGON COUNTERSUNK UNDERCUT
grip_length2.938 INCHES MINIMUM AND 2.954 INCHES MAXIMUM IN
head_height0.376 INCHES MINIMUM IN
thread_class3A A
fastener_length3.960 INCHES NOMINAL IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_between_flats1.194 INCHES MINIMUM IN
nominal_thread_diameter0.750 INCHES IN
minimum_tensile_strength39800 POUNDS PER SQUARE INCH LBS
NSN5306-01-508-0906
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 106467-12-47 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.376 INCHES MINIMUM IN
•
FASTENER LENGTH: 3.960 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6382 ASSN STD 1ST MATERIAL RESPONSE OR AMS6415 ASSN STD 2ND MATERIAL RESPONSE OR AMS6448 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
HEAD STYLE: HEXAGON COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.376 INCHES MINIMUM IN
FASTENER LENGTH3.960 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6382 ASSN STD 1ST MATERIAL RESPONSE OR AMS6415 ASSN STD 2ND MATERIAL RESPONSE OR AMS6448 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.750 INCHES IN
HEAD STYLEHEXAGON COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH2.938 INCHES MINIMUM AND 2.954 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS1.194 INCHES MINIMUM IN
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 2
AS194-12-47Reference document
Same NSN cross-reference
Reference document — Secondary reference
HS5039-0247Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 106467-12-47?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106467-12-47?
106467-12-47 is a BOLT,CLOSE TOLERANCE.
What parts can replace 106467-12-47?
There are 2 known substitutes for 106467-12-47: AS194-12-47, HS5039-0247. Substitute compatibility should be verified for your specific system.
What is the NSN for 106467-12-47?
106467-12-47 is cataloged in the U.S. Government catalog under NSN 5306-01-508-0906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106467-12-47

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.