PartsTable
Technical Data Sheet
Download PDF

106457-1 — ADAPTER

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

106457-1: ADAPTER.

The ADAPTER is a the manufacturer industrial component. Key specifications include body_width: 0.515 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN, body_height: 0.187 INCHES MAXIMUM IN, body_length: 1.235 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN, features_provided: BURN IN AND ELECTROSTATIC SENSITIVE AND PROGRAMMED AND ULTRAVIOLET ERASABLE, inclosure_material: CERAMIC, memory_device_type: PROM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-471-9246, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 106457-1
NSN: 5310-00-471-9246
NIINs: 004719246, 008322509, 013397106
FSC: 5310 — Nuts and Washers
CAGE: 0K9K5 — SPECIALTY & BALL VALVE ENGINEERING, INC. DBA SPECIALTY & BALL VALVE ENGINEERING (USA)
SPECIFICATIONS
body_width0.515 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
body_height0.187 INCHES MAXIMUM IN
body_length1.235 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN
features_providedBURN IN AND ELECTROSTATIC SENSITIVE AND PROGRAMMED AND ULTRAVIOLET ERASABLE
inclosure_materialCERAMIC
memory_device_typePROM
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
operating_temp_range-55.0 TO 125.0 CELSIUS DEGC
input_circuit_pattern12 INPUT
inclosure_configurationDUAL-IN-LINE
terminal_surface_treatmentSOLDER
voltage_rating_and_type_per_characteristic-0.5 VOLTS MINIMUM POWER SOURCE AND 7.0 VOLTS MAXIMUM POWER SOURCE
NSN5310-00-471-9246
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 106457-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 1
106457-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 106457-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106457-1?
106457-1 is a ADAPTER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 106457-1?
There is 1 known substitute for 106457-1: 106457-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 106457-1?
106457-1 is cataloged in the U.S. Government catalog under NSN 5310-00-471-9246. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106457-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.