PartsTable
Technical Data Sheet
Download PDF

106456-3-2 — 106456-3-2

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

106456-3-2: 106456-3-2.

The 106456-3-2 is a the manufacturer industrial component. Key specifications include overall_height: 0.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-980-5251, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 106456-3-2
NSN: 5305-00-980-5251
NIINs: 009805251, 011860014
FSC: 5305 — Screws
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
overall_height0.500 INCHES MAXIMUM IN
NSN5305-00-980-5251
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 106456-3-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
FASTENER LENGTH: 0.401 INCHES NOMINAL IN
•
THREAD LENGTH: 0.276 INCHES MINIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
FASTENER LENGTH0.401 INCHES NOMINAL IN
THREAD LENGTH0.276 INCHES MINIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEHIGH-TORQUE
SUBSTITUTES & CROSS-REFERENCES 4
GB510L3-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
HT8043-3-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
GB510DC3-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT239PB3-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 106456-3-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106456-3-2?
106456-3-2 is a 106456-3-2. It is classified as a MRO (MRO_GENERAL).
What parts can replace 106456-3-2?
There are 4 known substitutes for 106456-3-2: GB510L3-2, HT8043-3-2, GB510DC3-2 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 106456-3-2?
106456-3-2 is cataloged in the U.S. Government catalog under NSN 5305-00-980-5251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106456-3-2