PartsTable
Technical Data Sheet
Download PDF

106350 — WASHER,KEYWAY

✓ Government record, cited
Hama · NUT WASHER
PRODUCT OVERVIEW

106350: WASHER,KEYWAY.

- Specific holder for Apple iPad - Ideal for storing the iPad on a desk, etc. - Allows vertical and horizontal use of the iPad - Opening for the iPad speaker - Foldable and easy to carry along This part is cataloged in the U.S. Government catalog under NSN 5310-00-714-2140, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
106350
NSN: 5310-00-714-2140
FSC: 5310 — Nuts and Washers
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1015 OVERALL
hole_diameter1.312 INCHES NOMINAL IN
outside_diameter2.250 INCHES NOMINAL IN
material_thickness0.092 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
internal_keyway_width0.438 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
distance_from_centerline_to_bottom_of_internal_keyway0.688 INCHES NOMINAL IN
NSN5310-00-714-2140
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 106350 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM CENTERLINE TO BOTTOM OF INTERNAL KEYWAY: 0.688 INCHES NOMINAL IN
•
INTERNAL KEYWAY WIDTH: 0.438 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 2.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.092 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OVERALL
•
HOLE DIAMETER: 1.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM CENTERLINE TO BOTTOM OF INTERNAL KEYWAY0.688 INCHES NOMINAL IN
INTERNAL KEYWAY WIDTH0.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER2.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.092 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OVERALL
HOLE DIAMETER1.312 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
L33011Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 106350?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106350?
106350 is a WASHER,KEYWAY manufactured by Hama.
What parts can replace 106350?
There is 1 known substitute for 106350: L33011. Substitute compatibility should be verified for your specific system.
What is the NSN for 106350?
106350 is cataloged in the U.S. Government catalog under NSN 5310-00-714-2140. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106350

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.