PartsTable
Technical Data Sheet
Download PDF

106334-3-4D — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

106334-3-4D: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-150-3264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
106334-3-4D
NSN: 5305-00-150-3264
FSC: 5305 — Screws
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
thread_length0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
fastener_length0.510 INCHES MINIMUM AND 0.557 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentCADMIUM OVERALL
NSN5305-00-150-3264
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 106334-3-4D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.510 INCHES MINIMUM AND 0.557 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
•
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES NOMINAL FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.510 INCHES MINIMUM AND 0.557 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
SHANK UNTHREADED HOLE DIAMETER0.070 INCHES NOMINAL FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 3
202-15522-3A4Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
VT1631-3-4TReference document
Same NSN cross-reference
Reference document — Design control — primary reference
BA45132-3A4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 106334-3-4D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106334-3-4D?
106334-3-4D is a SCREW,CLOSE TOLERANCE.
What parts can replace 106334-3-4D?
There are 3 known substitutes for 106334-3-4D: 202-15522-3A4, VT1631-3-4T, BA45132-3A4. Substitute compatibility should be verified for your specific system.
What is the NSN for 106334-3-4D?
106334-3-4D is cataloged in the U.S. Government catalog under NSN 5305-00-150-3264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106334-3-4D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.