PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10630226-1
10630226-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RECEPTACLE,FRICTION CATCH STUD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.440 INCHES NOMINAL IN, special_features: HOLE DIA 0.135 IN. NOM;O/A HGT 0.220 IN.;LGTH 0.970 IN.

NOM IN, surface_treatment: DICHROMATE AND ZINC OVERALL, material_thickness: 0.012 INCHES NOMINAL IN, center_to_center_distance_between_mounting_holes: 0.685 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-433-1453, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10630226-1
NSN: 5340-00-433-1453
FSC: 5340
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.440 INCHES NOMINAL IN
special_featuresHOLE DIA 0.135 IN. NOM;O/A HGT 0.220 IN.;LGTH 0.970 IN. NOM IN
surface_treatmentDICHROMATE AND ZINC OVERALL
material_thickness0.012 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes0.685 INCHES NOMINAL IN
NSN5340-00-433-1453
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10630226-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: DICHROMATE AND ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 0.685 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTDICHROMATE AND ZINC OVERALL
MATERIALSTEEL OVERALL
SPECIAL FEATURESHOLE DIA 0.135 IN. NOM;O/A HGT 0.220 IN.;LGTH 0.970 IN. NOM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES0.685 INCHES NOMINAL IN
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
OVERALL WIDTH0.440 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
9M170-012Upgraded Successor
successor cross-reference
successor
9M170-012-1DUpgraded Successor
successor cross-reference
successor
A1663-012-1DUpgraded Successor
successor cross-reference
successor
601-18MInterchangeable
interchangeable cross-reference
interchangeable
18-141Interchangeable
interchangeable cross-reference
interchangeable
601-18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10630226-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10630226-1?
10630226-1 is a RECEPTACLE,FRICTION CATCH STUD.
What parts can replace 10630226-1?
There are 18 known substitutes for 10630226-1: 9M170-012, 9M170-012-1D, A1663-012-1D and 15 more. Substitute compatibility should be verified for your specific system.
Is 10630226-1 still available?
10630226-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10630226-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026