PartsTable
Technical Data Sheet
Download PDF

10630050-35 — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10630050-35: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.302 INCHES NOMINAL IN, material: STEEL OVERALL, drive_type: SLOTTED, eyelet_length: 0.322 INCHES NOMINAL IN, stud_head_height: 0.930 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-298-6999, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10630050-35
NSN: 5325-00-298-6999
FSC: 5325 — Fastening Devices
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
diameter0.302 INCHES NOMINAL IN
materialSTEEL OVERALL
drive_typeSLOTTED
eyelet_length0.322 INCHES NOMINAL IN
stud_head_height0.930 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
stud_assembly_styleSTUD ASSEMBLY
securing_device_typeWASHER
eyelet_outside_diameter0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
turnlock_stud_head_styleFLAT FILLISTER
material_accommodated_thickness0.420 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
distance_from_engaging_member_to_largest_bearing_surface_of_head0.962 INCHES MINIMUM AND 0.977 INCHES MAXIMUM IN
NSN5325-00-298-6999
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10630050-35 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EYELET OUTSIDE DIAMETER: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
DRIVE TYPE: SLOTTED
•
MATERIAL ACCOMMODATED THICKNESS: 0.420 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
•
DIAMETER: 0.302 INCHES NOMINAL IN
•
STUD HEAD HEIGHT: 0.930 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: WASHER
•
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD: 0.962 INCHES MINIMUM AND 0.977 INCHES MAXIMUM IN
•
TURNLOCK STUD HEAD STYLE: FLAT FILLISTER
TECHNICAL CHARACTERISTICS
EYELET OUTSIDE DIAMETER0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
DRIVE TYPESLOTTED
MATERIAL ACCOMMODATED THICKNESS0.420 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
DIAMETER0.302 INCHES NOMINAL IN
STUD HEAD HEIGHT0.930 INCHES NOMINAL IN
SECURING DEVICE TYPEWASHER
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.962 INCHES MINIMUM AND 0.977 INCHES MAXIMUM IN
TURNLOCK STUD HEAD STYLEFLAT FILLISTER
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
2600-15Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10630050-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10630050-35?
10630050-35 is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace 10630050-35?
There is 1 known substitute for 10630050-35: 2600-15. Substitute compatibility should be verified for your specific system.
What is the NSN for 10630050-35?
10630050-35 is cataloged in the U.S. Government catalog under NSN 5325-00-298-6999. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10630050-35

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.