PartsTable
Technical Data Sheet
Download PDF

10626035 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10626035: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include overall_width: 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN, special_features: PAINT OLIVE DRAB AND HAS BRACKET SUPPORT WELDED TO OUTSIDE DIA, material_thickness: 0.0667 INCHES MINIMUM AND 0.0880 INCHES MAXIMUM IN, loop_inside_diameter: 11.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-116-9595, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10626035
NSN: 5340-01-116-9595
FSC: 5340 — Hardware, Commercial
CAGE: 56161 — GENERAL DYNAMICS LAND SYSTEMS CANADACORP (CAN)
SPECIFICATIONS
overall_width1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
special_featuresPAINT OLIVE DRAB AND HAS BRACKET SUPPORT WELDED TO OUTSIDE DIA
material_thickness0.0667 INCHES MINIMUM AND 0.0880 INCHES MAXIMUM IN
loop_inside_diameter11.000 INCHES NOMINAL IN
NSN5340-01-116-9595
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10626035 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.0667 INCHES MINIMUM AND 0.0880 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 11.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL WIDTH1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
MATERIAL THICKNESS0.0667 INCHES MINIMUM AND 0.0880 INCHES MAXIMUM IN
SPECIAL FEATURESPAINT OLIVE DRAB AND HAS BRACKET SUPPORT WELDED TO OUTSIDE DIA
LOOP INSIDE DIAMETER11.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
P00-4079Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2589864Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10626035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10626035?
10626035 is a CLAMP,LOOP.
What parts can replace 10626035?
There are 2 known substitutes for 10626035: P00-4079, 2589864. Substitute compatibility should be verified for your specific system.
What is the NSN for 10626035?
10626035 is cataloged in the U.S. Government catalog under NSN 5340-01-116-9595. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10626035