PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10617374-1
10617374-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, grip_height: 0.100 INCHES NOMINAL IN, overall_width: 0.375 INCHES NOMINAL IN, overall_height: 0.270 INCHES NOMINAL IN, overall_length: 0.585 INCHES NOMINAL IN, style_designator: BARREL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-235-6084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10617374-1
NSN: 5340-00-235-6084
FSC: 5340
CAGE: 56161 — GENERAL DYNAMICS LAND SYSTEMS CANADACORP (CAN)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
grip_height0.100 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
overall_height0.270 INCHES NOMINAL IN
overall_length0.585 INCHES NOMINAL IN
style_designatorBARREL
material_document_and_classificationMIL-P-20693 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-235-6084
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10617374-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GRIP HEIGHT: 0.100 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
STYLE DESIGNATOR: BARREL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-20693 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.375 INCHES NOMINAL IN
GRIP HEIGHT0.100 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON
STYLE DESIGNATORBARREL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-20693 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH0.585 INCHES NOMINAL IN
OVERALL HEIGHT0.270 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
13211693Interchangeable
interchangeable cross-reference
interchangeable
ST7890740-004Interchangeable
interchangeable cross-reference
interchangeable
TM2S8Interchangeable
interchangeable cross-reference
interchangeable
5262694Interchangeable
Same NIIN cross-reference
interchangeable
G470082-6Interchangeable
Same NIIN cross-reference
interchangeable
1356AS1153Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10617374-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10617374-1?
10617374-1 is a RETAINER,NUT AND BOLT.
What parts can replace 10617374-1?
There are 7 known substitutes for 10617374-1: 13211693, ST7890740-004, TM2S8 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10617374-1?
10617374-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-235-6084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10617374-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026