PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1060BU15
1060BU15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: RECESSED, seal_width: 0.375 INCHES NOMINAL IN, outside_diameter: 3.628 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.623 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-253-2799, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1060BU15
NSN: 5330-00-253-2799
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleRECESSED
seal_width0.375 INCHES NOMINAL IN
outside_diameter3.628 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.623 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter2.500 INCHES NOMINAL IN
NSN5330-00-253-2799
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1060BU15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
CASE STYLE: RECESSED
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
•
HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR-OPPOSED
CASE STYLERECESSED
SEAL WIDTH0.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
HOUSING BORE DIAMETER3.623 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
MATERIALSTEEL CASE
OUTSIDE DIAMETER3.628 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
C12117Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
200 19/64Interchangeable
interchangeable cross-reference
interchangeable
25075Interchangeable
interchangeable cross-reference
interchangeable
10322232Interchangeable
interchangeable cross-reference
interchangeable
7B4910Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1060BU15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1060BU15?
1060BU15 is a SEAL,PLAIN ENCASED.
What parts can replace 1060BU15?
There are 13 known substitutes for 1060BU15: C12117, B94.11M, 200 19/64 and 10 more. Substitute compatibility should be verified for your specific system.
Is 1060BU15 still available?
1060BU15 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1060BU15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026