PartsTable
Technical Data Sheet
Download PDF

106074-437 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

106074-437: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include height: 0.124 INCHES NOMINAL IN, material: STEEL COMP 316, thread_class: 2A A, furnished_items: SCREW, effective_height: 0.062 INCHES NOMINAL IN, outside_diameter: 0.390 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-472-9909, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
106074-437
NSN: 5340-01-472-9909
FSC: 5340 — Hardware, Commercial
CAGE: 06773 — TIMBER TOP INC (USA)
SPECIFICATIONS
height0.124 INCHES NOMINAL IN
materialSTEEL COMP 316
thread_class2A A
furnished_itemsSCREW
effective_height0.062 INCHES NOMINAL IN
outside_diameter0.390 INCHES NOMINAL IN
special_featuresSOCKET HEAD CAP SCREW
style_designatorCLEAT
features_providedINSERT
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-01-472-9909
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 106074-437 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CLEAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI-316 ASSN STD SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 0.390 INCHES NOMINAL IN
•
FEATURES PROVIDED: INSERT
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
EFFECTIVE HEIGHT: 0.062 INCHES NOMINAL IN
•
HEIGHT: 0.124 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCLEAT
MATERIAL DOCUMENT AND CLASSIFICATIONAISI-316 ASSN STD SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER0.390 INCHES NOMINAL IN
FEATURES PROVIDEDINSERT
NOMINAL THREAD SIZE0.112 INCHES IN
EFFECTIVE HEIGHT0.062 INCHES NOMINAL IN
HEIGHT0.124 INCHES NOMINAL IN
SPECIAL FEATURESSOCKET HEAD CAP SCREW
DISTANCE FROM HOLE CENTER TO END0.125 INCHES NOMINAL IN
THREAD CLASS2A A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
918337-103Reference document
Same NSN cross-reference
Reference document — Secondary reference
FIT4180-103Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 106074-437?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106074-437?
106074-437 is a CLAMP,SYNCHRO.
What parts can replace 106074-437?
There are 2 known substitutes for 106074-437: 918337-103, FIT4180-103. Substitute compatibility should be verified for your specific system.
What is the NSN for 106074-437?
106074-437 is cataloged in the U.S. Government catalog under NSN 5340-01-472-9909. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106074-437

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.