PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10606754-1
10606754-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.7496 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, overall_width: 0.4325 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-966-2331, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10606754-1
NSN: 3110-00-966-2331
FSC: 3110
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
bore_shapeSTRAIGHT
bore_diameter0.7496 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
overall_width0.4325 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresOPERATING TEMPERATURE FROM MINUS 100 DEG F TO PLUS 175 DEG F DEGF
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter1.6245 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-966-2331
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10606754-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-7421 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.4325 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-7421 MIL SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESOPERATING TEMPERATURE FROM MINUS 100 DEG F TO PLUS 175 DEG F DEGF
INTERNAL FIT-UP DESIGNATIONSTANDARD
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
55128Interchangeable
interchangeable cross-reference
interchangeable
827Interchangeable
interchangeable cross-reference
interchangeable
724BK03MInterchangeable
interchangeable cross-reference
interchangeable
MILI6447TYPEM1AInterchangeable
interchangeable cross-reference
interchangeable
S8RPPTFMILL3545Interchangeable
interchangeable cross-reference
interchangeable
S8KDDMILL3545Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10606754-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10606754-1?
10606754-1 is a BEARING,BALL,ANNULAR.
What parts can replace 10606754-1?
There are 22 known substitutes for 10606754-1: 55128, 827, 724BK03M and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10606754-1?
10606754-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-966-2331. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10606754-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026