PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 106-29P47
106-29P47 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, outside_diameter: 1.312 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.062 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: RECTANGULAR METAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-197-5275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
106-29P47
NSN: 5330-00-197-5275
FSC: 5330
CAGE: 58265 — STRUTHERS WELLS CORP (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
outside_diameter1.312 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.062 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR METAL
material_document_and_classificationQQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-197-5275
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 106-29P47 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.312 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.312 INCHES NOMINAL IN
APERTURE DIAMETER1.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
ASTM-B152Interchangeable
interchangeable cross-reference
interchangeable
QQ-C-576BInterchangeable
interchangeable cross-reference
interchangeable
00093Interchangeable
interchangeable cross-reference
interchangeable
228836PC25Interchangeable
interchangeable cross-reference
interchangeable
159370PC2Interchangeable
interchangeable cross-reference
interchangeable
102-183P19Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 106-29P47?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106-29P47?
106-29P47 is a GASKET.
What parts can replace 106-29P47?
There are 7 known substitutes for 106-29P47: ASTM-B152, QQ-C-576B, 00093 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 106-29P47?
106-29P47 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-197-5275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106-29P47

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026