PartsTable
Technical Data Sheet
Download PDF

105B5426P1 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

105B5426P1: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321, first_leg_thickness: 0.063 INCHES NOMINAL IN, second_leg_thickness: 0.063 INCHES NOMINAL IN, second_leg_slot_width: 0.220 INCHES NOMINAL IN, second_leg_slot_length: 0.500 INCHES NOMINAL IN, first_leg_hole_diameter: 0.281 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-071-5969, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
105B5426P1
NSN: 5340-00-071-5969
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 321
first_leg_thickness0.063 INCHES NOMINAL IN
second_leg_thickness0.063 INCHES NOMINAL IN
second_leg_slot_width0.220 INCHES NOMINAL IN
second_leg_slot_length0.500 INCHES NOMINAL IN
first_leg_hole_diameter0.281 INCHES NOMINAL IN
second_leg_hole_arrangement_styleONE SLOT
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
first_leg_distance_between_hole_centers_along_width1.258 INCHES NOMINAL IN
first_leg_distance_between_hole_centers_along_length0.409 INCHES NOMINAL IN
first_leg_distance_from_edge_to_hole_center_along_width0.230 INCHES NOMINAL IN
first_leg_distance_from_edge_to_hole_center_along_length0.230 INCHES NOMINAL IN
NSN5340-00-071-5969
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 105B5426P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.230 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.258 INCHES NOMINAL IN
•
SECOND LEG SLOT WIDTH: 0.220 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
•
SECOND LEG SLOT LENGTH: 0.500 INCHES NOMINAL IN
•
SECOND LEG THICKNESS: 0.063 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.230 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.281 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.258 INCHES NOMINAL IN
SECOND LEG SLOT WIDTH0.220 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
SECOND LEG SLOT LENGTH0.500 INCHES NOMINAL IN
SECOND LEG THICKNESS0.063 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.230 INCHES NOMINAL IN
FIRST LEG THICKNESS0.063 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 105B5426P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 105B5426P1?
105B5426P1 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 105B5426P1?
105B5426P1 is cataloged in the U.S. Government catalog under NSN 5340-00-071-5969. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 105B5426P1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.