PartsTable
Technical Data Sheet
Download PDF

105B2379P1 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

105B2379P1: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.530 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN, overall_length: 5.076 INCHES MINIMUM AND 5.176 INCHES MAXIMUM IN, special_features: CUSHIONING MATERIAL REINFORCED W/WIRE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-799-3777, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
105B2379P1
NSN: 5340-00-799-3777
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
cushionINCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.530 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
overall_length5.076 INCHES MINIMUM AND 5.176 INCHES MAXIMUM IN
special_featuresCUSHIONING MATERIAL REINFORCED W/WIRE
material_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
mounting_hole_size0.187 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
inside_diameter/arch_length0.720 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
inside_diameter/large_arch_length1.220 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
distance_between_mounting_hole_centers4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM IN
distance_between_base_and_inside_of_arch0.422 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
NSN5340-00-799-3777
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 105B2379P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.187 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM IN
•
MOUNTING PAD: NOT INCLUDED
•
DISTANCE BETWEEN BASE AND INSIDE OF LARGE ARCH: 0.672 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LARGE ARCH AND MOUNTING HOLE: 1.260 INCHES MINIMUM AND 1.300 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.187 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM IN
MOUNTING PADNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF LARGE ARCH0.672 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
OVERALL LENGTH5.076 INCHES MINIMUM AND 5.176 INCHES MAXIMUM IN
OVERALL WIDTH0.530 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
MATERIAL THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LARGE ARCH AND MOUNTING HOLE1.260 INCHES MINIMUM AND 1.300 INCHES MAXIMUM IN
CUSHIONINCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.422 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 105B2379P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 105B2379P1?
105B2379P1 is a STRAP,RETAINING.
What is the NSN for 105B2379P1?
105B2379P1 is cataloged in the U.S. Government catalog under NSN 5340-00-799-3777. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 105B2379P1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.