PartsTable
Technical Data Sheet
Download PDF

105B2243P1 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

105B2243P1: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: PLASTIC AND ASBESTOS CUSHIONING, mounting_pad: NOT INCLUDED, overall_width: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, overall_length: 3.300 INCHES MINIMUM AND 3.320 INCHES MAXIMUM IN, style_designator: MULTIPLE ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-859-6719, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
105B2243P1
NSN: 5340-00-859-6719
FSC: 5340 — Hardware, Commercial
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
cushionINCLUDED
materialPLASTIC AND ASBESTOS CUSHIONING
mounting_padNOT INCLUDED
arch_quantity2
overall_width0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
overall_length3.300 INCHES MINIMUM AND 3.320 INCHES MAXIMUM IN
style_designatorMULTIPLE ARCH
material_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
impregnation_materialPLASTIC CUSHIONING
strengthening_featureWIRE REINFORCED CUSHIONING
inside_diameter/arch_length0.476 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
distance_between_mounting_hole_centers2.560 INCHES MINIMUM IN
NSN5340-00-859-6719
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 105B2243P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STRENGTHENING FEATURE: WIRE REINFORCED CUSHIONING
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.560 INCHES MINIMUM IN
•
MOUNTING PAD: NOT INCLUDED
•
ARCH QUANTITY: 2
•
STYLE DESIGNATOR: MULTIPLE ARCH
•
MATERIAL THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STRENGTHENING FEATUREWIRE REINFORCED CUSHIONING
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.560 INCHES MINIMUM IN
MOUNTING PADNOT INCLUDED
ARCH QUANTITY2
STYLE DESIGNATORMULTIPLE ARCH
OVERALL LENGTH3.300 INCHES MINIMUM AND 3.320 INCHES MAXIMUM IN
OVERALL WIDTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
MATERIAL THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
CUSHIONINCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.238 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
10502243P1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 105B2243P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 105B2243P1?
105B2243P1 is a STRAP,RETAINING.
What parts can replace 105B2243P1?
There is 1 known substitute for 105B2243P1: 10502243P1. Substitute compatibility should be verified for your specific system.
What is the NSN for 105B2243P1?
105B2243P1 is cataloged in the U.S. Government catalog under NSN 5340-00-859-6719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 105B2243P1