PartsTable
Technical Data Sheet
PartsTable / O-RING / 1059837
1059837 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, center_hole_diameter: 2.849 INCHES MINIMUM AND 2.879 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-599-7941, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1059837
NSN: 5331-00-599-7941
FSC: 5331 — O-RING
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
center_hole_diameter2.849 INCHES MINIMUM AND 2.879 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-599-7941
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1059837 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.849 INCHES MINIMUM AND 2.879 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.849 INCHES MINIMUM AND 2.879 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
208Interchangeable
interchangeable cross-reference
interchangeable
2001 80Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
15080Interchangeable
interchangeable cross-reference
interchangeable
015080Interchangeable
interchangeable cross-reference
interchangeable
35500-0213Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1059837?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1059837?
1059837 is a O-RING.
What parts can replace 1059837?
There are 8 known substitutes for 1059837: 208, 2001 80, B94.11M and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1059837?
1059837 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-599-7941. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1059837

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026