PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10596911-1
10596911-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include width: 0.8750 INCHES NOMINAL IN, height: 1.7500 INCHES NOMINAL IN, length: 1.2656 INCHES NOMINAL IN, diameter: 0.5625 INCHES NOMINAL IN, material: STEEL OVERALL, knob_length: 0.8955 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-956-4834, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10596911-1
NSN: 5340-00-956-4834
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width0.8750 INCHES NOMINAL IN
height1.7500 INCHES NOMINAL IN
length1.2656 INCHES NOMINAL IN
diameter0.5625 INCHES NOMINAL IN
materialSTEEL OVERALL
knob_length0.8955 INCHES NOMINAL IN
surface_treatmentCHROMATE OVERALL
operational_directionRIGHT-HAND
pawl_actuation_methodGRIP HANDLE
mounting_hole_diameter0.1930 INCHES NOMINAL IN
mounting_plate_to_pawl_distance0.1670 INCHES NOMINAL IN
NSN5340-00-956-4834
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10596911-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING PLATE TO PAWL DISTANCE: 0.1670 INCHES NOMINAL IN
•
HEIGHT: 1.7500 INCHES NOMINAL IN
•
DIAMETER: 0.5625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
LENGTH: 1.2656 INCHES NOMINAL IN
•
KNOB LENGTH: 0.8955 INCHES NOMINAL IN
•
SURFACE TREATMENT: CHROMATE OVERALL
•
WIDTH: 0.8750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING PLATE TO PAWL DISTANCE0.1670 INCHES NOMINAL IN
HEIGHT1.7500 INCHES NOMINAL IN
DIAMETER0.5625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LENGTH1.2656 INCHES NOMINAL IN
KNOB LENGTH0.8955 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE OVERALL
WIDTH0.8750 INCHES NOMINAL IN
OPERATIONAL DIRECTIONRIGHT-HAND
MOUNTING HOLE DIAMETER0.1930 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
1350160Interchangeable
interchangeable cross-reference
interchangeable
66-110Interchangeable
interchangeable cross-reference
interchangeable
7276Interchangeable
interchangeable cross-reference
interchangeable
STI5024Interchangeable
interchangeable cross-reference
interchangeable
SJ903Interchangeable
interchangeable cross-reference
interchangeable
MJ15024Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10596911-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10596911-1?
10596911-1 is a FASTENER,PAWL.
What parts can replace 10596911-1?
There are 7 known substitutes for 10596911-1: 1350160, 66-110, 7276 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10596911-1?
10596911-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-956-4834. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10596911-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026