PartsTable
Technical Data Sheet
Download PDF

105906H — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

105906H: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, second_end_style: CHAMFERED, pin_overall_length: 1.312 INCHES NOMINAL IN, pin_overall_diameter: 0.6540 INCHES MINIMUM AND 0.6550 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-276-6503, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
105906H
NSN: 5315-00-276-6503
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 29930 — INTERNATIONAL HARVESTER CO AGRICULTURAL EQUIPMENT DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
second_end_styleCHAMFERED
pin_overall_length1.312 INCHES NOMINAL IN
pin_overall_diameter0.6540 INCHES MINIMUM AND 0.6550 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
second_end_taper_angle15.0 DEGREES NOMINAL
second_end_taper_length0.250 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-00-276-6503
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 105906H · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
SECOND END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
SECOND END TAPER LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.6540 INCHES MINIMUM AND 0.6550 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.312 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
SECOND END TAPER ANGLE15.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
SECOND END TAPER LENGTH0.250 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.6540 INCHES MINIMUM AND 0.6550 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.312 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND END STYLECHAMFERED
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
47237Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 105906H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 105906H?
105906H is a PIN,STRAIGHT,HEADLESS.
What parts can replace 105906H?
There is 1 known substitute for 105906H: 47237. Substitute compatibility should be verified for your specific system.
What is the NSN for 105906H?
105906H is cataloged in the U.S. Government catalog under NSN 5315-00-276-6503. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 105906H

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.