PartsTable
Technical Data Sheet
10577SP ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PARTS KIT,SEAL REPLACEMENT,MECHA. Key specifications include end_item_identification: USED ON LIGHT ARMOURED VEHICLE LAV PER CAR APC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-460-3555, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10577SP
NSN: 5330-01-460-3555
FSC: 5330
CAGE: 0VUL5 — NORTH AMERICAN CONTROLS INC DBA NORTH AMERICAN CONTROLS INC (USA)
SPECIFICATIONS
special_featuresKIT CONTAINS: 1 GASKET SEAL OD 0.950 INCHES, 1 GASKET SEAL OD 0.710 INCES, 1 GASKET SEAL OD 0.65 INCHES, 1 BACK-UP RING OD 0.680 INCHES, 1 BACK-UP RING OD 0.620 INCHES IN
component_quantity5
end_item_identificationUSED ON LIGHT ARMOURED VEHICLE LAV PER CAR APC
NSN5330-01-460-3555
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10577SP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
COMPONENT QUANTITY: 5
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONUSED ON LIGHT ARMOURED VEHICLE LAV PER CAR APC
SPECIAL FEATURESKIT CONTAINS: 1 GASKET SEAL OD 0.950 INCHES, 1 GASKET SEAL OD 0.710 INCES, 1 GASKET SEAL OD 0.65 INCHES, 1 BACK-UP RING OD 0.680 INCHES, 1 BACK-UP RING OD 0.620 INCHES IN
COMPONENT QUANTITY5
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
105477Interchangeable
interchangeable cross-reference
interchangeable
147263Interchangeable
interchangeable cross-reference
interchangeable
9252Interchangeable
interchangeable cross-reference
interchangeable
25592Interchangeable
interchangeable cross-reference
interchangeable
11527Interchangeable
interchangeable cross-reference
interchangeable
08824Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10577SP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10577SP?
10577SP is a PARTS KIT,SEAL REPLACEMENT,MECHA.
What parts can replace 10577SP?
There are 11 known substitutes for 10577SP: 105477, 147263, 9252 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10577SP?
10577SP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-460-3555. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10577SP