PartsTable
Technical Data Sheet
PartsTable / MRO / 10568
10568 ✓ Verified by PartsTable
Bestway · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a Bestway industrial component. Key specifications include material: STEEL CORROSION RESISTING, bore_shape: STRAIGHT, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 3.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1422, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10568
NSN: 3110-00-198-1422
FSC: 3110
CAGE: 28873 — ITW FOOD EQUIPMENT GROUP LLC DBA HOBART SERVICE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
bore_shapeSTRAIGHT
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length3.875 INCHES NOMINAL IN
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width15.0 MILLIMETERS NOMINAL MM
flute_quantity2
load_directionRADIAL
overall_length6.250 INCHES NOMINAL IN
shank_diameter0.281 INCHES NOMINAL IN
NSN3110-00-198-1422
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10568 · Bestway ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SHIELD QUANTITY: 1
•
NONDEFINITIVE SPEC/STD DATA: 111 TYPE AND 2 CLASS AND 00 GRADE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL WIDTH15.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SHIELD QUANTITY1
BORE SHAPESTRAIGHT
NONDEFINITIVE SPEC/STD DATA111 TYPE AND 2 CLASS AND 00 GRADE
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY INTERNAL FIT-UP DESIGNATION
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
372983Interchangeable
interchangeable cross-reference
interchangeable
1-589-1Interchangeable
interchangeable cross-reference
interchangeable
SS1794Interchangeable
interchangeable cross-reference
interchangeable
20806Interchangeable
interchangeable cross-reference
interchangeable
19722Interchangeable
interchangeable cross-reference
interchangeable
138017Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10568?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10568?
10568 is a RESISTOR,FIXED,WIRE WOUND manufactured by Bestway. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10568?
There are 25 known substitutes for 10568: 372983, 1-589-1, SS1794 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10568?
10568 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1422. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10568

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026