PartsTable
Technical Data Sheet
Download PDF

10557802 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10557802: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING BODY, design_type: CLAW ENGAGING, hole_diameter: 0.203 INCHES NOMINAL IN, overall_width: 3.125 INCHES NOMINAL IN, overall_height: 1.250 INCHES NOMINAL IN, overall_length: 5.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-087-0943, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10557802
NSN: 5340-01-087-0943
FSC: 5340 — Hardware, Commercial
CAGE: 56161 — GENERAL DYNAMICS LAND SYSTEMS CANADACORP (CAN)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BODY
design_typeCLAW ENGAGING
hole_diameter0.203 INCHES NOMINAL IN
hole_quantity4
overall_width3.125 INCHES NOMINAL IN
overall_height1.250 INCHES NOMINAL IN
overall_length5.875 INCHES NOMINAL IN
operation_methodLEVER HANDLE
surface_treatmentZINC BODY
engaging_surface_width1.656 INCHES NOMINAL IN
NSN5340-01-087-0943
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10557802 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: CLAW ENGAGING
•
ENGAGING SURFACE WIDTH: 1.656 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BODY
•
MATERIAL: STEEL CORROSION RESISTING BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.250 INCHES NOMINAL IN
DESIGN TYPECLAW ENGAGING
ENGAGING SURFACE WIDTH1.656 INCHES NOMINAL IN
OVERALL LENGTH5.875 INCHES NOMINAL IN
OVERALL WIDTH3.125 INCHES NOMINAL IN
SURFACE TREATMENTZINC BODY
MATERIALSTEEL CORROSION RESISTING BODY
MATERIALRUBBER SYNTHETIC HANDLE
HOLE QUANTITY4
OPERATION METHODLEVER HANDLE
SUBSTITUTES & CROSS-REFERENCES 1
37-20-101-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10557802?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10557802?
10557802 is a CATCH,CLAMPING.
What parts can replace 10557802?
There is 1 known substitute for 10557802: 37-20-101-10. Substitute compatibility should be verified for your specific system.
What is the NSN for 10557802?
10557802 is cataloged in the U.S. Government catalog under NSN 5340-01-087-0943. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10557802