PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 105514-3
105514-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,LEVER is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 1.000 INCHES NOMINAL IN, overall_height: 0.950 INCHES NOMINAL IN, overall_length: 8.300 INCHES NOMINAL IN, end_item_identification: USED ON ARMORED PANEL, part_name_assigned_by_controlling_agency: SWING ASSEMBLY, UPPER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-500-8727, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
105514-3
NSN: 5340-01-500-8727
FSC: 5340
CAGE: 54786 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)
SPECIFICATIONS
materialSTEEL
overall_width1.000 INCHES NOMINAL IN
overall_height0.950 INCHES NOMINAL IN
overall_length8.300 INCHES NOMINAL IN
end_item_identificationUSED ON ARMORED PANEL
part_name_assigned_by_controlling_agencySWING ASSEMBLY, UPPER
NSN5340-01-500-8727
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 105514-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH8.300 INCHES NOMINAL IN
OVERALL HEIGHT0.950 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSWING ASSEMBLY, UPPER
MATERIALSTEEL
OVERALL WIDTH1.000 INCHES NOMINAL IN
END ITEM IDENTIFICATIONUSED ON ARMORED PANEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
831-082X5F0221KInterchangeable
interchangeable cross-reference
interchangeable
BT220PFP80M20PCTInterchangeable
interchangeable cross-reference
interchangeable
220PF500V10PCTX5FInterchangeable
interchangeable cross-reference
interchangeable
105528-1Interchangeable
interchangeable cross-reference
interchangeable
105528Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 105514-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 105514-3?
105514-3 is a BRACKET,LEVER.
What parts can replace 105514-3?
There are 5 known substitutes for 105514-3: 831-082X5F0221K, BT220PFP80M20PCT, 220PF500V10PCTX5F and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 105514-3?
105514-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-500-8727. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 105514-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026