PartsTable
Technical Data Sheet
Download PDF

10549265 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10549265: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 0.608 INCHES NOMINAL IN, length: 2.111 INCHES NOMINAL IN, material: STEEL COMP 304L, body_thickness: 0.036 INCHES NOMINAL IN, surface_treatment: PHOSPHATE ZINC AND PRIMER, securing_device_type: THREADED FASTENER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-043-4440, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10549265
NSN: 5340-01-043-4440
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
width0.608 INCHES NOMINAL IN
length2.111 INCHES NOMINAL IN
materialSTEEL COMP 304L
body_thickness0.036 INCHES NOMINAL IN
surface_treatmentPHOSPHATE ZINC AND PRIMER
securing_device_typeTHREADED FASTENER
cross-sectional_shape_styleFLAT
distance_from_first_hole_centerline_to_end_along_width0.118 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_length0.118 INCHES NOMINAL IN
distance_between_hole_centerline_and_first_hole_along_width0.375 INCHES NOMINAL IN
distance_between_hole_centerline_and_first_hole_along_length1.875 INCHES NOMINAL IN
NSN5340-01-043-4440
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10549265 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.118 INCHES NOMINAL IN
•
LENGTH: 2.111 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH: 1.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
SECURING DEVICE TYPE: THREADED FASTENER
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 0.118 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH: 0.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE ZINC AND PRIMER
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.118 INCHES NOMINAL IN
LENGTH2.111 INCHES NOMINAL IN
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH1.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
SECURING DEVICE TYPETHREADED FASTENER
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.118 INCHES NOMINAL IN
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH0.375 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE ZINC AND PRIMER
WIDTH0.608 INCHES NOMINAL IN
MATERIALSTEEL COMP 304L
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 10549265?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10549265?
10549265 is a COVER,ACCESS.
What is the NSN for 10549265?
10549265 is cataloged in the U.S. Government catalog under NSN 5340-01-043-4440. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10549265

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.