PartsTable
Technical Data Sheet
Download PDF

10545294 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10545294: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 642 OVERALL, nut_style: HEXAGON, nut_height: 0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN, thread_class: 3A A, thread_series: UNJC, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-845-7736, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10545294
NSN: 5310-00-845-7736
FSC: 5310 — Nuts and Washers
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialCOPPER ALLOY 642 OVERALL
nut_styleHEXAGON
nut_height0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
thread_class3A A
thread_seriesUNJC
thread_directionRIGHT-HAND
countersink_angle110.0 DEGREES NOMINAL NUT
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
nominal_thread_size0.138 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch32
NSN5310-00-845-7736
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10545294 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNJC
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS671 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NUT HEIGHT: 0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNJC
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
SPECIFICATION/STANDARD DATA80205-NAS671 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NUT HEIGHT0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
COUNTERSINK ANGLE110.0 DEGREES NOMINAL NUT
NUT STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 8
3038-402Reference document
Same NSN cross-reference
Reference document — Secondary reference
2X16251Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310008457736Reference document
Same NSN cross-reference
Reference document — Informative reference only
210-407Reference document
Same NSN cross-reference
Reference document — Secondary reference
12084BC3Reference document
Same NSN cross-reference
Reference document — Secondary reference
210-0407-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10545294?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10545294?
10545294 is a NUT,PLAIN,HEXAGON.
What parts can replace 10545294?
There are 8 known substitutes for 10545294: 3038-402, 2X16251, 5310008457736 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10545294?
10545294 is cataloged in the U.S. Government catalog under NSN 5310-00-845-7736. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10545294

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.