PartsTable
Technical Data Sheet
Download PDF

10542185 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10542185: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: WOOD BASE, nut_height: 0.906 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN, nut_length: 2.406 INCHES MINIMUM AND 2.468 INCHES MAXIMUM IN, plate_width: 1.781 INCHES MINIMUM AND 1.843 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-356-6643, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10542185
NSN: 5310-01-356-6643
FSC: 5310 — Nuts and Washers
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialWOOD BASE
nut_height0.906 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
nut_length2.406 INCHES MINIMUM AND 2.468 INCHES MAXIMUM IN
plate_width1.781 INCHES MINIMUM AND 1.843 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
nominal_thread_size0.500 INCHES IN
thread_quantity_per_inch20
NSN5310-01-356-6643
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10542185 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 2.406 INCHES MINIMUM AND 2.468 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 1.781 INCHES MINIMUM AND 1.843 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT HEIGHT: 0.906 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 20
TECHNICAL CHARACTERISTICS
NUT LENGTH2.406 INCHES MINIMUM AND 2.468 INCHES MAXIMUM IN
THREAD SERIESUNF
PLATE WIDTH1.781 INCHES MINIMUM AND 1.843 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT HEIGHT0.906 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
THREAD CLASS2B
THREAD QUANTITY PER INCH20
MATERIALWOOD BASE
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 317 OR STEEL COMP 347 NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 10542185?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10542185?
10542185 is a NUT,PLAIN,PLATE.
What is the NSN for 10542185?
10542185 is cataloged in the U.S. Government catalog under NSN 5310-01-356-6643. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10542185