1053K1 — LUBRICATING GUN,HANDHELD

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

1053K1: LUBRICATING GUN,HANDHELD.

The LUBRICATING GUN,HANDHELD is a the manufacturer industrial component. Key specifications include angle: 30.0 DEGREES, extension_type: RIGID BENT ANGLE TUBE, priming_method: SPRING, structural_form: STRAIGHT, extension_length: 6.000 INCHES NOMINAL IN, operation_method: MANUAL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-735-1273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1053K1

NSN: 5310-00-735-1273
NIINs: 007351273, 010622833
FSC: 5310 — Nuts and Washers
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)

SPECIFICATIONS

angle	30.0 DEGREES
extension_type	RIGID BENT ANGLE TUBE
priming_method	SPRING
structural_form	STRAIGHT
extension_length	6.000 INCHES NOMINAL IN
operation_method	MANUAL
discharge_pressure	0000.0 COMPREHENSIVE PROCUREMENT GUIDELINE - CONSTRUCTION PRODUCTS - CEMENT AND CONCRETE CONTAINING CENOSPHERES
lubricant_capacity	16.0 OUNCES OZ
dispensing_end_type	PUSH NOZZLE
supplementary_features	LOADER FITTING INCLUDED
NSN	5310-00-735-1273

COMPONENT DIAGRAM

KEY FEATURES

•

SHOULDER HEIGHT: 0.047 INCHES NOMINAL IN

•

STYLE DESIGNATOR: SHOULDERED AND RECESSED

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC ALL MATERIAL RESPONSES OR QQ-B-626 FED SPEC ALL MATERIAL RESPONSES OVERALL

•

OUTSIDE DIAMETER: 0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN

•

RECESS DEPTH: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN

•

SHOULDER DIAMETER: 0.282 INCHES NOMINAL IN

•

RECESS DIAMETER: 0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHOULDER HEIGHT	0.047 INCHES NOMINAL IN
STYLE DESIGNATOR	SHOULDERED AND RECESSED
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-613 FED SPEC ALL MATERIAL RESPONSES OR QQ-B-626 FED SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER	0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN
RECESS DEPTH	0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.016 INCHES NOMINAL IN
SHOULDER DIAMETER	0.282 INCHES NOMINAL IN
RECESS DIAMETER	0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN
SPECIAL FEATURES	FLUSH FLANGE 0.016 IN. THK,0.735 IN. MIN,0.745 IN. MAX DIA ATTACHED IN
MATERIAL	COPPER ALLOY 268 OR COPPER ALLOY 260 OVERALL

SUBSTITUTES & CROSS-REFERENCES 5

100995R1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

192253Reference document

Same NSN cross-reference

Reference document — Secondary reference

7351273Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5310007351273Reference document

Same NSN cross-reference

Reference document — Secondary reference

800865Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 1053K1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1053K1?

1053K1 is a LUBRICATING GUN,HANDHELD.

What parts can replace 1053K1?

There are 5 known substitutes for 1053K1: 100995R1, 192253, 7351273 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 1053K1?

1053K1 is cataloged in the U.S. Government catalog under NSN 5310-00-735-1273. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1053K1 — LUBRICATING GUN,HANDHELD

Request a Quote — 1053K1