PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10524104
10524104 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.328 INCHES NOMINAL IN, height: 0.109 INCHES NOMINAL IN, length: 0.281 INCHES NOMINAL IN, material: ALUMINUM ALLOY, hole_diameter: 0.094 INCHES NOMINAL IN, furnished_items: LOCKNUT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-026-4412, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10524104
NSN: 5340-00-026-4412
FSC: 5340
CAGE: 35351 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
width0.328 INCHES NOMINAL IN
height0.109 INCHES NOMINAL IN
length0.281 INCHES NOMINAL IN
materialALUMINUM ALLOY
hole_diameter0.094 INCHES NOMINAL IN
furnished_itemsLOCKNUT
surface_treatmentCHROMATE
surface_treatment_document_and_classificationMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
NSN5340-00-026-4412
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10524104 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 0.328 INCHES NOMINAL IN
•
LENGTH: 0.281 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.094 INCHES NOMINAL IN
•
HEIGHT: 0.109 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
•
SURFACE TREATMENT: CHROMATE
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH0.328 INCHES NOMINAL IN
LENGTH0.281 INCHES NOMINAL IN
HOLE DIAMETER0.094 INCHES NOMINAL IN
HEIGHT0.109 INCHES NOMINAL IN
FURNISHED ITEMSLOCKNUT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENTCHROMATE
MATERIALALUMINUM ALLOY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
60-4-12Upgraded Successor
successor cross-reference
successor
FFB571ANDCLASSAUpgraded Successor
successor cross-reference
successor
317-0098Upgraded Successor
successor cross-reference
successor
10524104Upgraded Successor
successor cross-reference
successor
639470-030Interchangeable
interchangeable cross-reference
interchangeable
0405-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10524104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10524104?
10524104 is a CLAMP,SYNCHRO.
What parts can replace 10524104?
There are 17 known substitutes for 10524104: 60-4-12, FFB571ANDCLASSA, 317-0098 and 14 more. Substitute compatibility should be verified for your specific system.
Is 10524104 still available?
10524104 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10524104

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026