PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10518040
10518040 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,WEBBING is a the manufacturer industrial component. Key specifications include width: 1.719 INCHES NOMINAL IN, end_type: W/ATTACHMENT FIRST END, fold_type: TIGHT LOCATION NOT OTHERWISE SPECIFIED, attachment_method_for_which_designed: SNAP FASTENER LOCATION NOT OTHERWISE SPECIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-306-0908, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10518040
NSN: 5340-01-306-0908
FSC: 5340
CAGE: 56161 — GENERAL DYNAMICS LAND SYSTEMS CANADACORP (CAN)
SPECIFICATIONS
width1.719 INCHES NOMINAL IN
end_typeW/ATTACHMENT FIRST END
fold_typeTIGHT LOCATION NOT OTHERWISE SPECIFIED
attachment_method_for_which_designedSNAP FASTENER LOCATION NOT OTHERWISE SPECIFIED
NSN5340-01-306-0908
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10518040 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END TYPE: W/ATTACHMENT FIRST END
•
WIDTH: 1.719 INCHES NOMINAL IN
•
ATTACHMENT METHOD FOR WHICH DESIGNED: SNAP FASTENER LOCATION NOT OTHERWISE SPECIFIED
•
FOLD TYPE: TIGHT LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS (FLIS)
END TYPEW/ATTACHMENT FIRST END
WIDTH1.719 INCHES NOMINAL IN
ATTACHMENT METHOD FOR WHICH DESIGNEDSNAP FASTENER LOCATION NOT OTHERWISE SPECIFIED
FOLD TYPETIGHT LOCATION NOT OTHERWISE SPECIFIED
END TYPEFOLDED SECOND END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
321414Interchangeable
interchangeable cross-reference
interchangeable
96740Interchangeable
interchangeable cross-reference
interchangeable
A1208PC44Interchangeable
interchangeable cross-reference
interchangeable
A2131PC68Interchangeable
interchangeable cross-reference
interchangeable
A1258PC44Interchangeable
interchangeable cross-reference
interchangeable
14539ADXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10518040?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10518040?
10518040 is a STRAP,WEBBING.
What parts can replace 10518040?
There are 15 known substitutes for 10518040: 321414, 96740, A1208PC44 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10518040?
10518040 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-306-0908. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10518040

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026