PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10512724
10512724 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 0.381 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, center_hole_diameter: 0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, cross-sectional_height: 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-166-2337, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10512724
NSN: 5330-01-166-2337
FSC: 5330
CAGE: 56161 — GENERAL DYNAMICS LAND SYSTEMS CANADACORP (CAN)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter0.381 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
center_hole_diameter0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
cross-sectional_height0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
NSN5330-01-166-2337
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10512724 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CENTER HOLE DIAMETER: 0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.381 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
CENTER HOLE DIAMETER0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.381 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
13S22-030Interchangeable
interchangeable cross-reference
interchangeable
7980746Interchangeable
interchangeable cross-reference
interchangeable
21224Interchangeable
interchangeable cross-reference
interchangeable
21224-15/16 INInterchangeable
interchangeable cross-reference
interchangeable
219Interchangeable
interchangeable cross-reference
interchangeable
N3204Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10512724?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10512724?
10512724 is a PACKING,PREFORMED.
What parts can replace 10512724?
There are 15 known substitutes for 10512724: 13S22-030, 7980746, 21224 and 12 more. Substitute compatibility should be verified for your specific system.
Is 10512724 still available?
10512724 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10512724

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026