PartsTable
Technical Data Sheet
PartsTable / MRO / 105127
105127 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: WOOL COMP 16R3 OVERALL, joint_type: SCARF-BEARING SURFACE ENDS, outside_diameter: 25.875 INCHES MINIMUM AND 26.125 INCHES MAXIMUM IN, special_features: MILDEW AND MOISTURE RESISTANT,MIL-F-2312,TYPE 3, aperture_diameter: 24.875 INCHES MINIMUM AND 25.125 INCHES MAXIMUM IN, cross-sectional_width: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-003-6781, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 105127
NSN: 5330-00-003-6781
FSC: 5330
CAGE: 24930 — L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
materialWOOL COMP 16R3 OVERALL
joint_typeSCARF-BEARING SURFACE ENDS
outside_diameter25.875 INCHES MINIMUM AND 26.125 INCHES MAXIMUM IN
special_featuresMILDEW AND MOISTURE RESISTANT,MIL-F-2312,TYPE 3
aperture_diameter24.875 INCHES MINIMUM AND 25.125 INCHES MAXIMUM IN
cross-sectional_width0.500 INCHES NOMINAL IN
cross-sectional_height0.375 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationC-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-003-6781
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 105127 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: WOOL COMP 16R3 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: C-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
JOINT TYPE: SCARF-BEARING SURFACE ENDS
•
CROSS-SECTIONAL HEIGHT: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
APERTURE DIAMETER: 24.875 INCHES MINIMUM AND 25.125 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 25.875 INCHES MINIMUM AND 26.125 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALWOOL COMP 16R3 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONC-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
JOINT TYPESCARF-BEARING SURFACE ENDS
CROSS-SECTIONAL HEIGHT0.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
APERTURE DIAMETER24.875 INCHES MINIMUM AND 25.125 INCHES MAXIMUM IN
SPECIAL FEATURESMILDEW AND MOISTURE RESISTANT,MIL-F-2312,TYPE 3
OUTSIDE DIAMETER25.875 INCHES MINIMUM AND 26.125 INCHES MAXIMUM IN
CROSS-SECTIONAL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
TA235PTInterchangeable
interchangeable cross-reference
interchangeable
SM-C-208021Interchangeable
interchangeable cross-reference
interchangeable
10099Interchangeable
interchangeable cross-reference
interchangeable
105-127Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 105127?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 105127?
105127 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 105127?
There are 4 known substitutes for 105127: TA235PT, SM-C-208021, 10099 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 105127?
105127 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-003-6781. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 105127

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026