PartsTable
Technical Data Sheet
Download PDF

10511558 — GROMMET,NONMETALLIC

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10511558: GROMMET,NONMETALLIC.

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.045 INCHES NOMINAL IN, hole_diameter: 0.202 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN, overall_height: 0.625 INCHES NOMINAL IN, flange_thickness: 0.045 INCHES NOMINAL IN, groove_outside_diameter: 0.435 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-623-0928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10511558
NSN: 5325-00-623-0928
FSC: 5325 — Fastening Devices
CAGE: 56161 — GENERAL DYNAMICS LAND SYSTEMS CANADACORP (CAN)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.045 INCHES NOMINAL IN
hole_diameter0.202 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
overall_height0.625 INCHES NOMINAL IN
flange_thickness0.045 INCHES NOMINAL IN
groove_outside_diameter0.435 INCHES NOMINAL IN
grommet_construction_typeSOLID
large_flange_outside_diameter0.595 INCHES NOMINAL IN
NSN5325-00-623-0928
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10511558 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 0.045 INCHES NOMINAL IN
•
LARGE FLANGE OUTSIDE DIAMETER: 0.595 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.435 INCHES NOMINAL IN
•
GROMMET CONSTRUCTION TYPE: SOLID
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
GROOVE WIDTH: 0.045 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.202 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.625 INCHES NOMINAL IN
FLANGE THICKNESS0.045 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER0.595 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.435 INCHES NOMINAL IN
GROMMET CONSTRUCTION TYPESOLID
MATERIALRUBBER SYNTHETIC OVERALL
GROOVE WIDTH0.045 INCHES NOMINAL IN
HOLE DIAMETER0.202 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
7064900Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5325006230928Reference document
Same NSN cross-reference
Reference document — Informative reference only
5942525Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10511558?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10511558?
10511558 is a GROMMET,NONMETALLIC.
What parts can replace 10511558?
There are 3 known substitutes for 10511558: 7064900, 5325006230928, 5942525. Substitute compatibility should be verified for your specific system.
What is the NSN for 10511558?
10511558 is cataloged in the U.S. Government catalog under NSN 5325-00-623-0928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10511558

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.