PartsTable
Technical Data Sheet
PartsTable / MRO / 10511
10511 ✓ Verified by PartsTable
Melissa & Doug · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include width: 1.375 INCHES NOMINAL IN, length: 1.562 INCHES NOMINAL IN, material: PLASTIC URETHANE, nut_style: HEXAGON, thickness: 0.625 INCHES NOMINAL IN, body_style: CYLINDRICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-012-0221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10511
NSN: 5305-00-012-0221
FSC: 5305
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
width1.375 INCHES NOMINAL IN
length1.562 INCHES NOMINAL IN
materialPLASTIC URETHANE
nut_styleHEXAGON
thickness0.625 INCHES NOMINAL IN
body_styleCYLINDRICAL
head_styleHEXAGON
nut_height0.114 INCHES NOMINAL IN
body_length0.180 INCHES NOMINAL IN
head_height4.0 MILLIMETERS NOMINAL MM
shaft_styleROUND, SLOTTED
shaft_length0.016 INCHES NOMINAL IN
NSN5305-00-012-0221
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10511 · Melissa & Doug ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.500 INCHES NOMINAL IN
•
INTERNAL DRIVE STYLE: SLOT
•
HEAD STYLE: ROUND
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
THREAD QUANTITY PER INCH: 24
•
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.500 INCHES NOMINAL IN
INTERNAL DRIVE STYLESLOT
HEAD STYLEROUND
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
THREAD QUANTITY PER INCH24
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
NOMINAL THREAD DIAMETER0.190 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
PC68290-4Interchangeable
interchangeable cross-reference
interchangeable
3300P1-502Interchangeable
interchangeable cross-reference
interchangeable
503-S 57Interchangeable
interchangeable cross-reference
interchangeable
350-RTInterchangeable
interchangeable cross-reference
interchangeable
44127Interchangeable
interchangeable cross-reference
interchangeable
10511Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10511?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10511?
10511 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Melissa & Doug. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10511?
There are 20 known substitutes for 10511: PC68290-4, 3300P1-502, 503-S 57 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10511?
10511 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-012-0221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10511

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026